Lifeview FlyVIDEO 2000 :Link title
How to set up my Lifeview Flyvideo 2000 in Linux :
Add this line : options saa7134 card=3 gbuffers=4 into: /etc/modprobe.conf
Add this line : Load “v4l” into : /etc/X11/xorg.conf
Verify, by typing “dmesg” in console.
Afterwards, install TVTime (or XawTV, or KDETV, or Zapping...), and use it !
Disclaimer : please keep in mind that I use NTSC, with US-cable, and this setup works in Dominican Republic, so one might have to tweak that a bit...